Indoor Church LED ScreensFixed-installation LED walls for sanctuaries, stages, chapels and baptisteries — slim cabinets, front service, pitches from P1.25 to P3.91
Three Indoor Platforms, One Goal: a Screen Your Congregation Stops Noticing
Every indoor church LED screen on this page is built for permanent installation inside a worship space. That means quiet power supplies, front-side maintenance so no volunteer ever crawls behind the wall, and cabinet depths that respect the building you already have — from a 100-year-old sanctuary with shallow plaster walls to a modern stage with a 4K broadcast camera pointed straight at the screen.
Across the three platforms below, the pixel pitch range runs from P1.25 to P3.91. As a rule of thumb for churches: P1.25–P1.9 for chapel-sized rooms and IMAG cameras, P2.5–P2.97 for typical sanctuaries where the closest seat is 3–4 m away, and P3.91+ when the first row sits beyond 5 m.
Ehonor Series — Fixed Church Screen
The workhorse for permanent sanctuary walls. Rigid die-cast cabinets, four mounting methods, and a size library covering stage backgrounds, side screens and creative builds — with real 1.92–5.12m project sizes to start from.
PS Series — Slim LED Video Wall
Ultra-slim cabinets that hang flush on the wall like framed art — no steel structure, no rear corridor. Bends into 90° corners and curves for baptisteries, columns and creative stage edges.
CPS Series — Small Pitch Display
Fine-pitch platform for chapels, front-row-critical sanctuaries and livestream rooms. Lyrics stay crisp at 2–3 m viewing distance, and 3840Hz refresh keeps camera footage free of scan-line flicker.
COB Series — 600×337.5mm COB LED Screen
Sealed flip-chip COB surface at 4H hardness: no lamp to knock off, less stage light reflected into the camera, and a front row at 2.5m that sees a picture instead of a grid.
Fine Pitch COB — P0.62–P0.9375
For a camera at the platform edge or a confidence monitor read from a metre: native 4K in a 2.4m to 3.6m wide wall, 3840Hz refresh, front service.
All-in-One — 108 / 135 / 162″ COB
Screen, control system, audio and stand in one delivered unit — for fellowship halls and small sanctuaries where there is no steel-structure budget.
Which Indoor Screen Fits Your Building?
Start from the room, not the spec sheet. This quick table matches the three platforms to the situations churches actually call us about.
| If your church has… | Best fit | Why |
|---|---|---|
| Shallow plaster or historic walls, no space for a frame | PS Series slim wall | 20.6mm cabinets mount flush; 2.4–4.8 kg per cabinet loads like a picture frame |
| A typical sanctuary, closest seat 3–4 m away | Ehonor P2.5 fixed wall | Rigid 480×320mm die-cast cabinets; proven church project size library |
| Chapel or livestream room, camera pointed at screen | CPS Series small pitch | P1.25–P1.9 pitch + 3840Hz refresh = crisp lyrics on camera without flicker |
Comparing a full solution instead of a single product? The indoor fixed-installation solution page walks through sizing, budget and installation planning end to end, and the outdoor church LED screens category covers yard signs and building-front displays, and freestanding lobby displays are covered under poster church LED screens.
The three COB platforms above have their own category page: COB church LED screens compares them by room type, alongside how COB fits next to the SMD platforms on this page.
LEGIDATECH indoor church LED screens — factory-direct, project-sized, front-serviceable. Part of the Church Screens category.


